Waterproof Connectors & Vents

Black M12 vent with a nut. The hydrophobic vent allows any pressure retained within the enclosure due to temperature change to escape and not plac...

IP67 waterproof F/F RJ45 panel shielded coupler. This is a 'mated waterproof' part (ie. it is only waterproof if the cap is on or the appropriate m...

Sheilded Cat5e RJ45 plug. This is an easy RJ45 to terminate, simply push the wires into the small transparent wire holder, then push that into the...

IP67 In-line RJ45 waterproof cable joiner. This allows you to join two RJ45 cable plugs together. In the center is a F/F coupler, the outer gland...

Waterproof RJ45 housing IP67. This housing can fit over a pre-terminated RJ45, no tools are required. A split seal fits around the CAT5e cable and...

Black M6 vent with no nut. The small vent allows any pressure retained within the enclosure due to temperature change to escape and not place any ...

Black M12 vent with no nut. The hydrophobic vent allows any pressure retained within the enclosure due to temperature change to escape and not pla...

Waterproof RJ45 housing IP67. This housing plugs into most of our waterproof RJ45 panel mount couplers. This is the sister part to SEL58-7A3258. ...

IP67 RJ45 female panel mountable fully moulded cable end. Either mount this onto a panel or use it as a fully waterproof female cable end for exten...

IP67 RJ45 F/F coupler unmated waterproof. This panel connector is fully potted, so if the cap is left off by accident, no water will ingress. CAT5e...

Amphenol LTW IP67 panel mount 8 pin male solder bucket connector - lock type locking mechanism. This connector is in the 'standard size' circular r...

IP67 metal waterproof panel mount female RJ45 coupler. This is unmated waterproof, which means even if you leave the cap off or our mating waterpr...